Guangdong Endurance Electronic Equipment Co., LtdMain products: testing machine
National Service Hotline :0086-13416787649 Wechat
Official wechat
Mobile
Mobile

Can the ceramic part take 15MPa? Pressure vessel with settable holding time gives same-batch results

Popularity:10Time of publication:2026/11/12 20:51:59

Model: NL-TCH-15

The problem

Whether a ceramic part in an appliance survives the standard cannot be judged by feel - GB 4706.1 sets a clear pressure-vessel test for ceramic parts. Without the apparatus in-house, a batch goes out for a week-long round trip and every new-structure verification waits on that small step.

Capability

The ceramic parts go into the vessel, the liquid is filled and the lid sealed; after the holding time is set, pressurisation starts. The vessel rises to the test pressure of at least 15MPa and switches automatically to timed holding, then prompts for opening and sampling; release is one key. The vessel, sealed lid and pressurisation line are rated for the test pressure with safety protection, and the bench footprint fits a single workstation. With one unit in the laboratory, ceramic-part verification and incoming-lot checks are finished in the same batch - no more queuing for outside testing.

NL test equipment

Applicable standards

GB 4706.1-2005 Safety of household and similar electrical appliances - General requirements, clause 22.32, test of ceramic material parts; sample specification and holding parameters follow the standard clauses and the customer technical agreement.

Key specifications

  • Basis: GB 4706.1-2005 clause 22.32 (ceramic material parts test)
  • Pressure vessel: working pressure at least 15MPa
  • Holding time: settable, automatic holding and timing
  • Structure: bench vessel + sealed lid + pressurisation line
  • Safety: safety protection devices included
  • Operation: one-key pressurise - hold - release flow
  • Use: pressure endurance testing of ceramic parts at laboratory and inspection stations

Applications

Ceramic-part structural verification and incoming inspection at appliance plant laboratories; GB 4706.1 clause testing capability for third-party laboratories; supplier qualification of new ceramic parts

About the manufacturer

Guangdong Endurance Electronic Equipment Co., Ltd provides non-standard customization, drawing confirmation, factory acceptance, on-site installation and commissioning, operation training and long-term technical service; 12-month warranty and long-term spare parts supply. Tel: 0760-88500902 / 13416787649. Web: en.zsnaili.com.

Recommended products

Ranking of similar articles

Latest news articles