Model: NL-SSZT-1
Water heaters, dishwashers, purifiers and dispensers come in many categories with different interfaces, so laboratories often build a separate rig for each type; voltage, water temperature, pressure, flow, water quality and surface temperature are read on scattered instruments, the readings never align in time and reports do not reconcile, while every model change costs another round of rework.
The bench is a single station universal platform for overall performance testing of water related appliances, covering storage and instantaneous water heaters, under sink heaters, dishwashers, water purifiers, instant hot water dispensers, pipeline machines, purified drinking machines, electric kettles, tea makers and humidifiers. The multi function test stand adjusts from 600 to 1800mm and carries 100kg for fast model changes. Electrical measurement spans 0-300V and 0-30A with power, energy, power factor and frequency synchronised at plus or minus 0.2 percent FS and standby draw measurable from 5W through a class 0.2 power analyser with current transformer. Inlet parameters use a PT100 insertion probe at plus or minus 0.5C, pressure 0-1.6MPa at plus or minus 0.3 percent FS, and flow 0.1 to 16L/min at plus or minus 0.3 percent with an electromagnetic meter on the tap water line and a turbine meter on the pure water line; the outlet side measures temperature and pressure together on hot water up to 95C. Sixteen K type thermocouple channels cover surfaces from -10 to 150C at plus or minus 1C over housings, heating elements and plumbing. Water quality is a three in one TDS, pH and chlorine readout with 1ppm resolution. Environment simulation uses a 0-300V 45-65Hz variable frequency supply switchable across 110, 115, 220 and 230V plus a 0.05 to 0.7MPa manual pressure regulator with digital readout, and water temperature runs ambient or hot. Data management samples at 10Hz or faster in sync, loads parameter templates by model, shows figures and trend charts together, overlays curves, stores in MySQL with local backup and generates Excel, CSV and PDF reports automatically under two level access control. The frame is 40 by 40 aluminium profile with a perforated 304 stainless worktop, water drains to a collection trough, plumbing is food grade 304 in DN15, DN20 and PE quick fittings, the IP54 cabinet carries earth leakage protection, earth resistance stays under 4 ohms and the platform passes a 72 hour continuous run check.
GB 4706.1-2024 Household and similar appliances, safety, part 1 general requirements (current); GB/T 35937-2018 Performance test methods for household and similar drinking water treatment units (current); GB 34914-2021 Minimum allowable values of water efficiency and grades for water purifiers (current); performance and energy figures for dishwasher and water heater categories follow their respective standards and the customer agreement.
Universal test platform for water related categories in appliance ecosystem laboratories; overall performance verification and endurance sampling of purifiers, water heaters and dishwashers; R and D iteration and small batch factory inspection; data acquisition and reporting platform for water related products in third party laboratories
Guangdong Endurance Electronic Equipment Co., Ltd provides non-standard customization, drawing confirmation, factory acceptance, on-site installation and commissioning, operation training and long-term technical service; 12-month warranty and long-term spare parts supply. Tel: 0760-88500902 / 13416787649. Web: en.zsnaili.com.
QQ
Service call
Back to the top