Guangdong Endurance Electronic Equipment Co., LtdMain products: testing machine
National Service Hotline :0086-13416787649 Wechat
Official wechat
Mobile
Mobile

No machine that survives IPX9 hot high pressure spray? The NL-IPX9K-1000 runs all four angles in one cycle

Popularity:5Time of publication:2026/11/20 20:57:51

Model: NL-IPX9K-1000

The problem

An ordinary rain chamber cannot deliver the 8-10MPa pressure of IPX9K or heat the water to 85C, and moving nozzles by hand while watching a stopwatch leaves the cycle data incomplete. Export certification and vehicle maker audits often stop right at this clause.

Capability

The chamber performs IPX9K high temperature high pressure spray tests on enclosures. Water pressure spans 8 to 10MPa, water temperature 25 to 85C, spray distance 100 to 200mm with four nozzles. The swinging pipe offers 0, 30, 60 and 90 degree positions, spraying 30 seconds at each angle for a 120 second cycle, switching automatically. The working chamber measures 1000 by 1000 by 1000mm with a SUS304 interior, powder coated steel exterior and observation window. The turntable is a 500mm stainless disc rated 15kg, driven by an integrated gear motor of ratio 1 to 120 and 90W through a variable frequency drive at 1 to 6 r/min. The water circuit uses a corrosion resistant stainless pump, an electronic high temperature flow meter reading 14 to 16 L/min, stainless ball valves and fittings, a multi mesh filter and continuous water supply. Total test time, spray and pause, intermittent and continuous modes are all digitally timed; the power supply likewise supports intermittent and continuous operation. The touch screen has a dedicated IPX9K screen showing run count, current count, spray time settable 10.0 to 999.9 seconds with a 30 second default, turntable speed 1 to 15 r/min with a default of 5, live flow and status. The water circuit and tank sit in the base of the cabinet to save floor space.

NL test equipment

NL test equipment

Applicable standards

GB/T 4208-2017 Degrees of protection provided by enclosure, IP code (current); IEC 60529 international equivalent; ISO 20653 Road vehicles, degrees of protection, IP code; DIN 40050-9 protection grades now merged into ISO 20653; test duration and spray conditions follow the IPX9K requirement and the customer agreement.

Key specifications

  • Protection level: IPX9K hot high pressure spray (combined chamber, expandable)
  • Water pressure: 8 to 10MPa
  • Water temperature: 25 to 85C
  • Spray distance: 100 to 200mm, four nozzles
  • Spray angles: 0/30/60/90 degrees, 30s each, 120s cycle
  • Working chamber: 1000 by 1000 by 1000mm, SUS304 interior
  • Turntable: 500mm diameter, 15kg load, 1-6 r/min variable frequency
  • Flow: 14 to 16 L/min electronic high temperature flow meter
  • Spray time: 10.0 to 999.9s settable, 30s default
  • Turntable speed: 1 to 15 r/min settable, 5 default
  • Control: touch screen with run count, flow and status
  • Site requirements: three phase 380V supply, dedicated breaker, floor drain

Applications

Enclosure protection verification of electric vehicle on board electrical components and charging equipment; IPX9 verification of outdoor cabinets, sensors and lighting; pre testing for commercial vehicle and construction machinery export certification; enclosure ingress protection testing in third party laboratories

About the manufacturer

Guangdong Endurance Electronic Equipment Co., Ltd provides non-standard customization, drawing confirmation, factory acceptance, on-site installation and commissioning, operation training and long-term technical service; 12-month warranty and long-term spare parts supply. Tel: 0760-88500902 / 13416787649. Web: en.zsnaili.com.

Recommended products

Ranking of similar articles

Latest news articles