In reverse-osmosis purifiers, commercial water treatment skids and small boosting systems, the pressure tank behind the pump is the most overlooked part of the line. While the pump runs the flow looks smooth; the moment it stops, the tank only buffers a few seconds and the outlet starts to sputter. Over half a year the rubber bladder and the pre-charge decay quietly, the buffer capacity drops by half or more, pump cycling doubles, terminals and check valves wear first, and the pressure pulsations loosen pipe fittings ahead of schedule. Production tests the pump curve and the tank burst pressure, but buffer capacity, outlet pulsation and cycling count versus decay are never measured. Pump, tank, check valve and faucet form one coupled system; no component test on its own tells you whether the machine will sputter.
Household drinking water treatment devices with reference to GB/T 30307, RO purifier water efficiency to GB 34914; pump hydraulic acceptance to GB/T 3216; appliance safety to GB 4706.1. Buffer limits, pulsation tolerances and cycling criteria can follow the customer standard, sampling to GB/T 2828.
Six stations complete a new-versus-decayed buffer comparison in a day and a full pump-tank design record from new part to ten thousand cycles in a week. “It fits and water comes out” becomes a report with buffer capacity, pulsation spectrum and cycling curves. Tank selection, pre-charge setting and after-sales sputter complaints all settle on one bench.
Guangdong Endurance Electronic Equipment Co., Ltd. — a non-standard testing equipment manufacturer of post-pump pressure tank and outlet pulsation benches, pump performance test systems, pump test bench ranges, level sensor life test machines, dishwasher test equipment and washing machine test equipment.
Keywords: pump test bench, pump performance test, level sensor life test, dishwasher test equipment, washing machine test equipment.
QQ
Service call
Back to the top