Model: NL-BP-3
Burst pressure is the safety floor of a cooling channel, yet sampling is often done with a hand pump: the pressure rise rate is uncontrolled, pressure cannot climb high enough, and the burst value is read off a needle. When a customer asks for a curve there is nothing to hand over.
The machine performs proof and burst pressure tests on flow channels of cooling plates, condensers and evaporators. A high flow electric pump with servo pressure regulation raises pressure automatically at the rate set in the program. Water pressure spans 0.1 to 30MPa with 0.01MPa accuracy; static pressure sensors cover 0 to 30MPa at 0.5 percent FS and sampling above 60Hz, so the burst peak and the full pressure-time curve are stored. Three independent stations run in parallel and a burst on one does not interrupt the others. A 100L stainless steel tank with automatic refill keeps the water supply steady. The servo pressure system has strong over-current capability and protects both operators and equipment under overload, and fast analog input modules keep pressure tracking without lag. Guarding fixtures contain burst debris inside the cabinet and venting fixtures remove air from the specimen first so that air compression does not distort the result. A PLC with touch screen shows pressure, test time and status live, gives audible and visual prompts, and stops on abnormal interruption; the cabinet is explosion proof and over-pressure or over-temperature stops the machine. Data is collected and stored for USB export. Power is AC380V, 50Hz, and flanges or quick couplings are made to the customer part.
GB/T 13927-2008 Industrial valves, pressure testing (shell strength and seat tightness, current); GB 38031-2020 Electric vehicles traction battery safety requirements (liquid cooling clauses); GB 5226.1-2019 Electrical safety of machinery; burst level, pressure rise rate and hold time follow the customer technical agreement.
Burst and proof pressure verification of liquid cooling plates and cold plates for traction batteries; channel strength testing of automotive condensers, evaporators and heater cores; shell and joint pressure testing of valves and pipes; type testing and incoming sampling of battery liquid cooling components
Guangdong Endurance Electronic Equipment Co., Ltd provides non-standard customization, drawing confirmation, factory acceptance, on-site installation and commissioning, operation training and long-term technical service; 12-month warranty and long-term spare parts supply. Tel: 0760-88500902 / 13416787649. Web: en.zsnaili.com.
QQ
Service call
Back to the top