Guangdong Endurance Electronic Equipment Co., LtdMain products: testing machine
National Service Hotline :0086-13416787649 Wechat
Official wechat
Mobile
Mobile

Micro-Leak in a Heat Exchanger Missed by Bubble Testing? NL-LEAK-6 Helium & Differential-Pressure Leak Test Bench Runs Six Stations (pump test bench)

Popularity:2Time of publication:2026/10/9 9:23:15

Micro-leaks in heat exchangers, condensers and pressure-bearing tube assemblies are among the hardest failures to trace in the appliance and refrigeration industry. A water-immersion bubble test only catches the larger ones: brazed joints and expansion points begin to weep only after thermal cycling and vibration, and an operator with a tank of water cannot see it. Discovering the problem when the appliance is recalled in the field is far too late. Turning leak rate into a measurable number is the only dependable incoming gate.

What the NL-LEAK-6 leak test bench measures

  • Helium mass spectrometry combined with differential-pressure decay, covering micro-leaks
  • Six stations pressurising, stabilising, holding and judging in parallel — an order of magnitude faster than manual bubble testing
  • Numerical leak rate output (Pa·m³/s or sccm) that can be traced and compared
  • Automatic compensation for charge pressure, hold time and ambient temperature
  • One-touch recipe switching for tubes, heat exchangers, water tanks and filter housings of different volumes
  • A constant-pressure supply module shared with our pump test bench platform, so pressure stability can be verified

Applicable standards

GB/T 150 (pressure vessels), GB/T 15558, GB 4706.1 (household appliances – general safety), IEC 60335-2-40 (heat pumps and air conditioners), and the relevant clauses of GB/T 3216 (pumps – flow and pressure measurement); acceptance limits can also be set to the customer's internal leak-rate specification.

Stations and throughput

Six stations in parallel, built for 24/7 operation; a single judgement drops from minutes to tens of seconds, so one bench covers the whole incoming gate on a production line.

Manufacturer

Guangdong Endurance Electronic Equipment Co., Ltd. — a non-standard testing equipment manufacturer of leak test benches, pump test bench and pump performance test systems, level sensor life test machines, dishwasher test equipment and washing machine test equipment.

Keywords: pump test bench, pump performance test, level sensor life test, dishwasher test equipment, washing machine test equipment.

Recommended products