Gas Hob Needing Several Pushes to Light, Flame-Out Protection Responding Late or Tripping Falsely? NL-GSC-6 Gas Hob Ignition & Flame-Out Protection Endurance Bench Runs Six Stations (washing machine test equipment)

Gas hobs that need several pushes to light and go out when released, or whose flame-out protection responds late and trips falsely, are frequent in both service and safety-lot inspection. The cause is usually carbonised ignition electrodes, decaying thermocouple (or flame-rod) output, and sluggish valve action. None of this shows up in a single ignition trial at incoming inspection — it typically appears only after months of use.

What the NL-GSC-6 gas hob ignition and flame-out protection endurance bench measures

• Six stations in parallel, ignition cycling endurance: tens of thousands of light-and-off cycles on a set rhythm, with ignition success rate and ignition time logged throughout (sharing the sequencing and data-acquisition module of our washing machine test equipment)
• Flame-out protection response time: simulating accidental flame loss and measuring valve shut-off time and consistency, with automatic NG judgement out of tolerance
• Thermocouple / flame-rod output decay tracked and filed against cycle count to assess service life
• False-trip and missed-ignition statistics to quantify lot-to-lot consistency
• Valve actuation force and hysteresis testing to reproduce failure modes such as going out when released and poor return
• Barcode and batch binding, with raw data exported per unit for the record

Applicable standards

GB 16410 (domestic gas cooking appliances), GB 17905 (safety management rules for domestic gas burning appliances), GB 4706.1 (household appliances – general safety), EN 30 (domestic cooking appliances burning gas) and CJ/T series industry standards; criteria can follow the customer's standard and safety requirements.

Stations and throughput

Six stations running 24/7 complete the tens of thousands of ignition cycles an operator would have to watch in just a few days; ignition success rate and flame-out response time can be rechecked cycle by cycle, allowing batch-by-batch sampling of both incoming parts and finished machines so ignition trouble and protection failures are stopped before shipment.

Manufacturer

Guangdong Endurance Electronic Equipment Co., Ltd. — a non-standard testing equipment manufacturer of gas hob ignition and flame-out protection endurance benches, pump test bench and pump performance test systems, level sensor life test machines, dishwasher test equipment and washing machine test equipment.

Keywords: pump test bench, pump performance test, level sensor life test, dishwasher test equipment, washing machine test equipment.