Condenser Copper Tube Coil Burst Test Machine NL-SCBP-1 0-20MPa Proof Pressure 6.3MPa 5min Hold Limit Pressure 18.6MPa Burst Proof Glass Guarded Chamber Auto Stop on Leakage GB/T 35937
8-Station Water Purifier Comprehensive Performance Test Bench NL-JSQ-8 Pure Water 0.2-2L/min Drain 0.3-12L/min Proof Pressure 0.05-3.5MPa Pulsation 5-30 Cycles per Minute Water Efficiency 900Hz Sampling GB 34914
Water-Related Appliance Overall Performance Test Bench NL-SSZT-1 Single Universal Station 0-300V 0-1.6MPa 0.1-16L/min 16-Channel Surface Temperature TDS Water Quality Variable Frequency Supply
Model: NL-YBG-245
Powered aging before an industrial instrument leaves the factory is still done one unit at a time: someone plugs each meter in, watches the readings and copies down voltage, current and power. Without temperature control the aging rack cannot run a hot batch, and pulling power to install parts stops the whole layer and breaks the rhythm of the entire batch.
The bench runs powered endurance aging of industrial instruments and tracks changes in voltage, current, power and energy consumption during operation together with charging time; the fault call is made when the powered time reaches the set point. There are 245 test stations arranged in five drawer layers 120mm high, 49 stations per layer, each station 120mm by 120mm with a magnet held screw stud seat for conduction. Forty nine 220V indicator lamps per layer give a per station view of power status, so a dead station is found at a glance. Drawing a drawer out cuts the power for safe loading; pushing it back closes the LN coupler and powers the 49 stations of that layer again, so loading never interrupts the other four layers. Each layer has its own 1kW 0-250V constant voltage adjustable supply, and the five layers can run different voltage settings at the same time. Aging temperature spans room temperature to 65C and powered time is settable from 0 to 9999 minutes. The fixture is universal for different instrument panel sizes, the worktop is 8mm wear resistant electrical board with anti static matting, total power is 220VAC 5kW, and the base cabinet measures 920 by 920 by 1450mm with station count and layer height expandable to the site.
GB/T 2423.2-2008 Environmental testing, test B high temperature (current); GB 5226.1-2019 Electrical safety of machinery (current); the aging temperature profile, power cycling program and fault criteria follow the customer product characteristics and factory inspection agreement.
Factory aging screening for industrial instruments and transmitters; powered endurance testing of metering and charging modules; mixed ambient and high temperature aging on one line; batch powered reliability sampling in third party laboratories
Guangdong Endurance Electronic Equipment Co., Ltd provides non-standard customization, drawing confirmation, factory acceptance, on-site installation and commissioning, operation training and long-term technical service; 12-month warranty and long-term spare parts supply. Tel: 0760-88500902 / 13416787649. Web: en.zsnaili.com.
QQ
Service call
Back to the top