The problem

Rollers get stiff, jump the track or squeal within months and every complaint lands on the door maker; a few hundred manual pushes prove nothing with uncontrolled counts and forces; heavy glass doors may deform rollers that nobody detected before delivery.

Capability

The machine endurance-tests rollers on finished sliding doors (furniture doors, shower room doors). The finished door is connected to the machine which opens and closes it repeatedly, simulating daily use; after a set number of cycles the roller is inspected for damage or degradation. Speed 0-10 cycles/min; cylinder bore 50mm with 1200mm stroke; load sensor 0-100kg; PLC with HMI; pneumatic drive from 0.5MPa air; single station; 80x80mm industrial aluminium frame rated 60-180kg; counter 0-99999; door leaf up to about 2600mm high and 1200mm wide; door weight 40-60kg normal, 180kg limit; frame 2700x960x2400mm; 220V 50Hz 0.5kW. Components: Kunlun touch screen, Delta PLC, Panasonic servo, Omron proximity switches.

Key specifications

• 用途：含滑轮成品门（家具移门/淋浴房移门等）的滑轮反复启闭耐久性测试
• 适用标准：JG/T 129-2007
• 测试速度：0~10次/分；计数器0~99999次自动计数
• 驱动：气缸驱动（缸径50mm、行程1200mm）；气源≥0.5MPa
• 载荷：载荷传感器0~100kg；门重40~60kg常规，极限测试180kg
• 试品范围：移门单扇高度约2600mm、宽度约1200mm
• 框架：高强度工业铝型材80×80mm，承重范围60~180kg；单工位
• 控制：PLC人机界面控制
• 外形尺寸：高2700×宽960×长2400mm
• 电源：AC220V 50Hz 0.5kW

Applications

Roller endurance verification for shower room, wardrobe and glass sliding doors; factory life inspection at roller and hanging-wheel makers; incoming sampling and type testing of furniture hardware; R&D comparison of door systems

About the manufacturer

Guangdong Endurance Electronic Equipment Co., Ltd provides non-standard customization, drawing confirmation, factory acceptance, on-site installation and commissioning, operation training and lifetime technical service; 12-month warranty and lifetime spare parts supply. Tel: 0760-88500902 / 13416787649. Web: en.zsnaili.com.