The problem

Leaking weld seams that pass factory inspection show up at the user home as water leakage, driving complaints and recalls; manual pressurising relies on experience; whole-pot pressure holding in a high-pressure tank is slow and risky to watch by hand; and without records there is no quality traceability.

Capability

Dedicated non-standard machine for pressure cooker body air-tightness, covering internal immersion pressure test and weld-seam pressure test. Step one (weld-seam immersion): the body is loaded into the mould, clamping cylinders press down, the water-tank cylinder lowers to submerge the weld port, solenoid valves apply 0.3-1.8MPa and leakage is judged automatically by pressure change with a visual bubble check as double assurance. Step two (whole-pot tank holding): one or two cookers are placed in the water-filled high-pressure tank, the clamping cylinder fastens the tank screws, pressurised to 0.3-1.8MPa with holding time 0-9999s settable; at the end the machine alarms and releases pressure automatically. Test range 0-1.6MPa adjustable, test time 0-100s settable, one station with fixtures; differential pressure gauges 0-1.6MPa with upper/lower limit signal output; Panasonic PLC with A/D module and 7-inch Weiluntong colour touch screen, automatic lifting; pass green light, fail red light with pass/fail counting; leaking parts stay pressurised until the cancel button releases for leak marking; booster tank test system (250x600mm), three SUS304 fixture sets, water tank, precision regulators, gauges and high-pressure 24V solenoid valves; leakage and emergency-stop protection with dual-colour alarm beacons; frame approx. 1550x870x1750mm excluding 700mm cylinder height, AC220V/50Hz.

Key specifications

• 测试功能：内部浸入耐压测试+焊接断（焊缝）耐压测试，两步测试一键完成
• 焊缝浸水测试：压紧气缸压紧→水箱气缸下降淹没焊接口→加压0.3～1.8MPa→压力变化自动判定+目测气泡人工判定双保障
• 高压罐保压测试：样品1～2件放入有水高压罐→压紧紧固→加压0.3～1.8MPa→保压0～9999s可设→到点报警并自动泄压
• 试验范围：0～1.6MPa可调；测试时间0～100s可设置；1工位配夹具
• 压力测量：差压压力表0～1.6MPa（上下限信号输出DC24V）；精密调压器；压力表
• 控制系统：PLC控制（松下PLC+A/D模块）；威纶通7寸彩色触摸屏；自动升降
• 结果输出：合格亮绿灯、不合格自动亮红灯；自动记录统计合格数与不合格数
• 泄漏定位：漏气保持保压充气状态，人工取消键后泄压，便于标记泄漏点返工
• 主要配置：增压罐测试系统1套（直径250×600mm）；配套模具3套（304）；水箱；高压24V电磁阀
• 安全保护：漏电保护、紧急停止；双色报警指示灯

Applications

Factory air-tightness inspection of electric pressure cooker bodies and weld seams; incoming and in-process sampling on cooker welding lines; immersion pressure verification of pressure-vessel type bodies; quality control and R&D verification at cookware manufacturers

About the manufacturer

Guangdong Endurance Electronic Equipment Co., Ltd provides non-standard customization, drawing confirmation, factory acceptance, on-site installation and commissioning, operation training and lifetime technical service; 12-month warranty and lifetime spare parts supply. Tel: 0760-88500902 / 13416787649. Web: en.zsnaili.com.