The problem

Generic hipot kits lack the standard-mandated rod - mass, contact diameter or edge radius out of tolerance makes results non-reproducible, and certification audits ask for the exact figure-29 fixture.

Capability

Passive fixture for the solid insulation electric strength test of GB 4943.1-2022 clause 5.4.9 and figure 29, used with a hipot tester. Metal test rod 100g plus/minus 5g, contact face 5mm plus/minus 0.1mm, edge rounded to 0.5mm radius; the rod is guided vertically and pressed by its own weight for repeatable contact pressure. Epoxy laminated base plate with red and black banana terminals connecting the hipot high-voltage and return leads.

Key specifications

• 用途：GB 4943.1-2022条款5.4.9及图29固体绝缘抗电强度试验（配耐压测试仪使用）
• 金属试验棒：质量100g±5g
• 测试接触面直径：5mm±0.1mm
• 实验棒边缘：倒圆处理，半径0.5mm
• 接线端子：红/黑香蕉插孔，连接耐压仪高压端与回路端
• 结构：绝缘层压板底座+金属导向支架，试验棒垂直自重施压
• 材料：底板环氧酚醛层压板，试验棒与支架为金属件
• 电源：无源装置（配合外部耐压测试仪工作）

Applications

Process verification at adapter and charger plants; safety-lab build-up for certification bodies and third-party labs; market surveillance testing

About the manufacturer

Guangdong Endurance Electronic Equipment Co., Ltd provides non-standard customization, drawing confirmation, factory acceptance, on-site installation and commissioning, operation training and lifetime technical service; 12-month warranty and lifetime spare parts supply. Tel: 0760-88500902 / 13416787649. Web: en.zsnaili.com.